Build an AB box

From kee–(at)–ustin.ibm.com Mon Jan 29 23:11:15 CST 1996
From: kee–(at)–ustin.ibm.com ()
Newsgroups: rec.music.makers.builders
Subject: Re: A/B Box–How?
Date: 29 Jan 1996 18:01:57 GMT
Distribution: world
Originator: kee–(at)–een.austin.ibm.com

In article , rumle–(at)–gt.net (Steve Eichler) writes:
> Could anyone suppy me with the basics on building an A/B box?
> Thanx.
> Steve.
A. Get a box, and a three jacks.
B. Get a SPDT switch suitable for stomp-box use.
C. Mechanically mount the jacks and the switch in the box.
D. Wire one jack to the common terminal of the switch.
E. Wire the two other jacks to the other two switch terminals, one jack to
each terminal.
F. Close up the box. Enjoy.